Produse pentru furnizor zeolit uk (6)

Spezifikation finden Sie auf unserer Website. Bei Anfragen und Rückfragen senden Sie uns gerne eine Nachricht.

Sanascreed Walkable screed based on hydraulic lime, silico-calcareous aggregates with a maximum grain size of 5 mm and light aggregates with pozzolanic activity, fiber-reinforced with polypropylene and glass microfibres, used for the construction, with the addition of water, of resistant screeds and substrates , in green building interventions and in the restoration of period and monumental buildings. Laying slabs and screeds based on hydraulic lime. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer. Gradually add Sanascreed and the water still required, continue to mix until a homogeneous, lump-free mixture of the desired consistency is obtained. Support the product at the reference height and float until a smooth and planar surface is obtained, preparing the joints beforehand where necessary. The mixing water indicatively necessary is equal to 18-20% by weight (4.5 -5 litres per bag 25 kg). Approximately 17 kg/m² of Sanascreed for every centimetre of thickness to be implemented (approximately 1700 kg per cubic metre). Bag 25 kg

SURFECO® PLUS is a super-spreading surfactant based on a trisiloxane ethoxylate, a silicone polyether copolymer with 550 molecular weight. SURFECO® PLUS has super-spreading properties in aqueous solutions while remaining stable in formulations from pH 5 - 8. SURFECO® PLUS can reduce surface tension in aqueous solutions at use levels up to 1.0 % by weight. Typical recommended starting level is 0.1 %. Stable effects during storage period Super-spreading and wetting Lowers surface tension more, compared to conventional surfactants Provides an aqueous surface tension of 21.5 nM/m2 Effective and remaining stable in formulations from pH 5 - 8 Low viscosity Very effective at low concentrations SURFECO® PLUS should be added directly into tank and agitated to ensure proper mixing. For optimum performance, solutions containing SURFECO® PLUS should be applied within 72 hours after mixing. Surface Tension (0.1%):(0.1%)21,5 nM/m2 Viscosity at 25 0C:500-900 mPa.s Cloud Point:< 10 °C Base Fluid Viscosity:20 – 30 Ionic Character:Nonionic

Pipette Tip 50-1000 PP (blue)

Pipette Tip 0,1 - 20 PP (crystal)

Cotton Applicator 150 mm Alu, Mini Head, sterile individually